Bullet Points:

1、High Quality Material: The high-strength hot carbon tough PVC airbag adopts reinforced thermal fusion technology, which is firm and not easy to break. If a single layer leaks, it will not affect the normal use of the surrounding baby.

2、Upgraded air Leak-: Each layer of airbag has an upgraded version of leak-, which is highly sealed to prevent air leakage.

3、Comfortable to Use: The wear-resistant thermal insulation foam bottom is comfortable for pedaling without bump.

4、Baby Falling Prevention: The thick bottomed inflatable bladder effectively blocks the cold on the ground, avoiding the rapid drop in water temperature, and prevents the baby from falling and stung while swimming or playing in the pool.

5、Product Sizes: 110 * 88 * 33cm; 128 * 85 * 45cm; 155 * 108 * 46cm; 181 * 141 * 46cm.

Specifications:

Name: Swimming Pool

Sizes(about):

110 * 88 * 33cm/43.31*34.65*12.99in

128 * 85 * 45cm/50.39*33.46*17.72in

155 * 108 * 46cm/61.02*42.52*18.11in

181 * 141 * 46cm/71.26*51.51*18.11in

Material: High-strength hot carbon tough PVC layered  airbag

Instructions for use:

After unpacking, unfold it completely and lay it flat on a clean and smooth ground.

From the bottom to the top, inflate layer by layer, inflate to 90% -95% saturation, and then press down to parallel to the body of the pool. After inflating for 8 hours, there is no air leakage, and then add cold water. Add hot water (after mixing with water). The temperature must not be higher than 50% C).

After use, open the bottom drain plug. After the water is drained, place the swimming pool in the shade and dry it. Then open the vent , completely deflate and put it in a PE bag and place it in the shade.


Packing List:

Swimming Pool * 1


note:

Please be careful not to use a knife or other sharp tools when unpacking. Do not inflate too much, because it is a plastic material, the principle of thermal expansion and contraction of rubber, inflatable products have their own "God extendibility, due to the size system 、 The difference between the inflation saturation and the measurement method. When you first receive the goods, the size will be small, there may be an error of about 5-10 cm, and it will return to normal after you charge more times.

The size measurement is: to measure from the position of the inflation nozzle