Self-propelled/Hand push-type four-stroke gasoline mower gasoline engine 8-gear height adjust weeder MDSLX-196EA lawn mower 1PC
Product parameter:
Product name: Gasoline mower
Model: MDSLX-196EA
Total displacement (cc): 196
Maximum power (kw/3600rpm): 3.6
Fuel number: ≥92#
Fuel tank capacity: 1300ml
Lubricating oil capacity (ml): 550ml
Adjustment height: 8 gear
Size (cm): 160*51*98
Wheel diameter (cm): Front wheel: 20; rear wheel: 25
Net weight (kg): 48
Side row: Yes
Electric start: Yes
Showing picture:
Safe use of maintenance and maintenance
Correct and safe use, regular maintenance and maintenance to improve service life and efficiency
I. separate use of gasoline and oil
This machine uses a four-stroke engine, gasoline and oil are used separately. Above 92 # gasoline is used and 4T mark oil is added.
II. Filling oil
Oil is the key to the use of lawnmower, no oil is strictly prohibited to start. Oil must be added to the machine before it is used, and it is strictly forbidden to use it in the state of inorganic oil. Under normal conditions, the new machine adds 400 ml of oil, and the oil is controlled within the range of the upper line and the lower line of the oil ruler mark. Excessive addition of oil will cause thick smoke in the exhaust pipe, long time use of air filter will choke oil, affect the entry of air, engine power will be significantly reduced. Too little oil will cause the machine to pull the cylinder, even break, piston damage and so on.
III. considerations for use
1. Replacement of engine oil on a regular basis
The new machine should be rotated at low speed for 5 minutes before use, and the oil must be changed after 5 hours of use. It will be replaced every 25 hours in the future. The method is to start the machine for a few minutes and then stop (change the oil cleanly and thoroughly in the hot state),tilt the oil ruler in the direction of the whole machine, or use the tool loosening machine oil screw at the bottom of the oil ruler to release the oil.
2. Running-in of the engine
A. new machine running-in: the engine is running-in at low speed for 5-10 minutes before use.
B. Working running-in: the engine is in a medium speed state when it is used for the first time (at the minimum speed when the grass can be cut)
C. running-in time: a box of fuel
3. Considerations in work
In order to avoid excessive wear caused by overheating of the engine and improve the service life of the engine, after the fuel in the random fuel tank has been exhausted, it must continue to work after the natural cooling of the machine for 20 minutes, otherwise it will aggravate the wear of the piston, piston ring and cylinder arm and lead to the reduction of the compression ratio, which will eventually lead to the damage of the engine.
IV. Cleaning of filters
A. the cleaning of air filter, the air filter should be cleaned for 10 hours use, and the paper filter should be replaced for 50 hours. Paper filter core can not use cleaning solution cleaning, can not use air gun blowing washing, can only gently slap.
B. Cleaning of fuel filter (air pump blowing method can be used, that is, the inlet tubing of carburettor can be removed and the tubing can be blown by air pump).
C. cleaning of oil filter (blowing, clean oil cleaning method can be used).
D. the cleaning of spark plug carbon deposition, half a year cleaning carbon deposition, replacement of spark plug once a year.
E. After the blade is used for a section, the edge of the blade should be sharpened.
V. Safety of use
Before using, you should clean up brick, corner iron, stump and other hard objects on the grass. No one is allowed to walk around with a radius of 15 meters. Don't fill the gasoline in indoor. Wipe the spilled gasoline clean. Smoking is strictly prohibited in the course of work. Wear protective clothing and protective blindfold.
If you choose "seller's shipping method"(368.42usd), we will help you to arrange the shipment by sea and delivery to your nearest seaport!
If shipping by sea, after arriving destination seaport, the buyer need to pay the destination port charges (such as terminal handling charges, documents charges, storage charges, ect), tax to do the customs clearance and pick up the goods.
Notice:when the parcel arrived to your customs,please pay the tax and pick up the parcle,we are not responsible for any customs duty or import tax.
If you choose DHL / ARAMEX/ FEDEX,TNT ,UPS, ECT, we will help you to arrange the shipment by international express and directly delivery to your address(DOOR TO DOOR SERVICE)!
1)In order to protect your items and avoid any damage from the shipping process, When you receive the package, Buyers should inspect package / goods carefully before signing receipt of goods.
If there is any damages, please contact your local ARAMEX / DHL / Fedex to ask the complaints and claims OR please contact with us within 24 hours.Then take the photos for the damaged machine and package, immediately send the message to us, we will assist you to fix the problems.
2)if you have any problem about product or shipping, Please give us the opportunity to resolve any problem. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues.
3)And your feedback is extremely important to our store, If you are satisfied with our product and our server ,after you confirm this order, Please leave us a positive feedback and 5 stars, we also will give you "PERFECT 5 STARS",
When you rate the shipping time part please take international transit into consideration. Your recognition will make us more confident to develop business and serve you better.