About this item

• 【THE ACCESSORY OF BRYNER LADDER】Work with bryner 7 in 1 ladder, the support rack kit can be used as a scaffold. it can at a maximum weight load of 1200 lbs.
• 【WHAT YOU WILL GET】Support rack kit include heavy duty two-part steel trays and supporting rack, allowing you to cover a large area without having to keep moving the ladder.
• 【SAFETY AND STABILITY DESIGNED】The steel trays are made of 100% hardened high-strength steel, and the supporting rack is designed with 4 backbone fixing support rods to ensure your safety when used as a scaffolding platform.
• 【EASY TO ASSEMBLE】The holes in the support frame are already pre designed to be easily installed with only hand-turned screws.
  

  Bryner 7-in-1 step ladder meets or exceeds all SGS EN131 standards for safety and stability. It is made of Aviation Grade Aluminium with reinforced tube corners designed to enhance safety and stability, giving this ladder a maximum weight load of 330 pounds.

  
  

  UPGRADE JOINTS LOCK

  The Safety joint Locks are made of 100% hardened high strength steel to ensure your safety and peace of mind. Various functions are available by adjusting joints. The protective sleeve of the joints is designed to avoid metal edges hurting fingers and improve the overall aesthetics of the ladder.

  (Must be locked joint locks at all times during use)

  SPECIFICATIONS

  • Color: Black
  • Material: Aviation Grade Aluminium
  • Package Size: 60.6" x 14.2" x 15"
  • Weight Capacity: 330 lbs(150Kg)
  • Extension Length: 19.7 ft(6m)
  • Step Distance: 11 inches
  • Total Steps: 4 Rungs X 5 Step = 20 Steps

   

  EXCELLENT DETAILS

  

  WARNING

   

  1. MUST Refer to manufacturer instructions before setting up or using a ladder;
  2. Do a pre-use check and inspect and maintain the ladder at regular intervals to ensure the equipment is in safe working condition;
  3. Before using the ladder, MUST install the stabilizer bars first;
  4. MUST be locked joint locks at all times during use;
  5. When using the scaffolding function, the support kit rack MUST be installed;
  6. The ladder must be used at an angle of 75 degrees in relation to the ground or follow the 1 in 4 rule (1 out for every 4 units up);
  7. Under the condition of the straight ladder, if you intend to fold it or alter other functions, MUST place it on the floor for adjustments.

   

  WIDE APPLICATION