Product selling points:
1. Adjustable temperature control soldering iron: 200-400 ° C.
A 2.60W soldering iron with adjustable temperature through the knob on the electronic soldering iron as needed.
The upgraded heat-resistant material and four ventilation holes on the steel pipe design of the soldering iron help with rapid cooling.
4. Tin absorber - High pressure vacuum tube with aluminum body frame, most suitable for removing solder from PCB through-hole solder joints.
5. 5 different welding heads to meet all your welding needs. DIYer's best gift idea for repairing various electronic and chip boards, soldering, jewelry, guitars, watches, wires, mobile devices, computer hardware, and small electronic works.
Parameters:
Product name: 60W electric soldering iron welding tool kit
Working voltage: 110V/220
Power: 20W-60W
Temperature range: 200 ℃~450 ℃
Welding bracket: stainless steel
Output power: 60W
Input voltage: 110V/220V
Specifications: European, American
Packaging A List
1 x 60W adjustable soldering iron
Packaging B List
1 x 60W adjustable soldering iron
5x different soldering iron tips
How to weld
1. Prepare the LDK welding table and soldering iron; Keep the iron tip clean, free of any oxides and carbides, and apply tin on the surface of the steel plate, especially for the first time
2. Please wet the sponge before use
3. Use a soldering iron to heat the solder components, such as PCB leads and pads, and keep the solder components evenly heated
4. When the temperature is high enough, bring the welding wire close to the joint, and the welding material will melt and flow freely
5. When there is enough tin, please remove the welding wire
6. Remove the soldering iron in a direction of approximately 45 ° and turn off the power
7. When cooled to a safe enough level, place it in the bracket
Note:
Due to manual measurement, please allow an error of 0-1cm.
Due to differences between different monitors, images may not reflect the actual color of the product.