80W Electric Soldering Iron Temperature Adjustable Digital Soldering And Desoldering Pen Station With Solder Wire Multimeter Set

Soldering iron Specifications:
Voltage: AC220-240V OR AC100-130V
Power: 80W Frequency: 50Hz/60Hz
Temperature Range: 180~500℃/356~932℉
Temperature Stability: ±5℃
Heating Type: Wmore Ceramics Element
Soldering Iron Tips: 900M-B1.2
Wire Length: 1.4m / 55.12in
Soldering Iron Size: Approx.242*25*25mm/9.6*0.98*0.98in
Soldering Iron Weight: Approx.96g/3.4oz
Package Size: Approx. 254*55*35mm/10*2.2*1.4n
Package Weight: Approx. 139g / 4.9oz

Temperature operation

Press the (+) button once to increase 1℃; press and hold it to increase
temperature continuously.
Press the (-) button once to reduce 1℃; press and hold it to reduce
temperature continuously.
The newly set temperature will be saved after 3 seconds,and will keep
the temperature for next time powering-on.When (℉) or (℃) symbol
flashes, it means the heating core has not reached the set temperature.

Temperature Calibration:
1.After 60 seconds of power on, put the soldering tip on a thermometer,
and a moderate amount of solder on the soldering tip; make the test
point and the soldering tip have good touch.
2.When thermometer displays a stable temperature (about 2 seconds),
write down the temperature.

Operational attention

Parameter setting:
1.To press the red and white button both at
the same time before it is power on, power
on,after the LCD is working,stop to press the
button, you will enter the setting menu.The
LCD shows (F) or (C)
2.Press the white button to choose C(degree
centigrade) or F(Fahrenheit).Press the Red
button to choose Element U20(JCD01),U20(JC
D02),U30(JCD03),U40(JCD04).
3.Pressing the (-) and (+) at the same time
to save your setting operation and quit the
setting menu(finished)
To protect the user from scald, when on the
setting menu, it will stop heating.

Failure warning indication
The LCD shows (OP): the heating element is open circuit.
Solution:1.change the element.2.To confirm that whether
the pin of element is oxidized.
The LCD shows(E1):The outlet is poor contact,or thebattery
source interfering the soldering iron that it is power down.
Solution:1.Unplug the soldering iron.2.Close the interfering
source. 3.To use it far away from the interfering source.

SET-1 Package List

1pcs 80W LCD soldering iron
1pcs Stainlness steel soldering stand
1pcs Sponge
5pcs Tips
1pcs Solder Wire 18g
1pcs Tweezers
1pcs Sucker

SET-2 Package List

1pcs 80W LCD soldering iron
1pcs Stainlness steel soldering stand
1pcs Sponge
5pcs Tips
1pcs Solder Wire 18g
1pcs Tweezers
1pcs Multimeter

SET-3 Package List

1pcs 80W LCD soldering iron
1pcs Stainlness steel soldering stand
1pcs Sponge
5pcs Tips
1pcs Solder Wire 18g
1pcs Tweezers
1pcs Sucker
1pcs Brush
1pcs Solder Wick CP-2015
1pcs Copper wire
1pcs Bag

SET-4 Package List

1pcs 80W LCD soldering iron
1pcs Stainlness steel soldering stand
1pcs Sponge
5pcs Tips
1pcs Solder Wire 18g
1pcs Tweezers
1pcs Sucker
1pcs Brush
1pcs Copper wire
1pcs Multimeter
1pcs Bag