Note: if you choose "Only Controller", no matter which "plug type" you choose, you will only receive one controller,without any power adapter.
1. Knob and display
2. Power selection
DC 12-24V , The higher the voltage, the higher current ; the maximum voltage is 24V, the minimum current is 3A, and the faster the heating speed ; on the contrary, conversely, the lower voltage, the lower the current, the minimum is 1.5A, and the heating speed is slightly slower.
3. Menu instructions
Press the knob to enter menu, it will shows 7 options:
ACT: calibration , HSL: brightness , DMH: sleep , LED: always on display , LVF: power , LAG: language , RTN: return
ACT: calibration
Insert the T12 tip to handle and power on, set the temperature at 300, until the temperature in "real-time temperature" is stably display at 300, at this time, use a temperature measuring instrument to measure the temperature of T12 tip and record it. such as the measuring temperature is 350, then the calibration value is 50.
Calculation formula: calibration value=measuring temperature - setting temperature
(Note: Before calibration, the value after calibration must be set to 0 )
HSL: brightness
brightness adjustable range is 2-100 , 2 is darkest, 100 is the brightest
DMH: sleep
when screen is "DMH ON 5" , It means that if the operator does not use the soldering iron for 5 seconds(automatically detect the use status of the soldering iron),the soldering iron will stop heating, and it will start heating again after picking it up.
when screen is "DMH OFF", It means that the soldering iron will always be in working condition, and the automatic detection function is turned off.
LED: always on display
when screen is "LED ON 5",It means that after 5 seconds of no key operation, the screen will be off, and when the key is operated again, the screen will light up again.
when screen is "LED OFF", It means the screen will stay on
LVF: power
This option indicates whether the power supply is stable. If the power supply is unstable, you can adjust the value appropriately. If the main menu shows insufficient power, it is recommended to replace the power supply
LAG: language
Available languages are: Chinese , Engligh
RTN: return
Return to main interface
Package includes:
"Controller Only":
1 * T12 controller only (without T12 tip and power supply)
"T12-K Kit":
1 * Controller
1 * T12-K tip
1 * Power adapter (US or EU plug)
Picture shows:
