Note: If you need to specify the display color, please leave a message; we choose randomly by default.
(Если вам нужно указать цвет дисплея, пожалуйста, оставьте сообщение; мы выбираем случайным образом по умолчанию.)
Parameter
<1> T12 Soldering iron station
<2> Input voltage: AC 100-230V
<3> Maximum output power: 75 watt
<4> Temperature adjustment range: 200-450℃
<4> Display color: Red / Blue / Green / White (If you need to specify the display color, please leave a message; we choose randomly by default.)
<5> Power cable type: EU / US
<6> Machine size(L*W*H): 133x87x44mm
<7> Handle cable length: 100cm
Parameter setting modes of display controller:
(Suggest using the default mode.)
Long press the encoder button → start → enter the
parameter settings mode:
“P00”: Restore the default parameters (“0” for not
recovery, “1” for recovery)
“P01”: Operational amplifier gain (200 to 350 times,
default 230)
“P02”: Operational amplifier offset voltage (0 ~ 250mV,
default 100)
“P03”: Thermocouple ℃/ mV data (30 ~ 50, default 41)
“P04”: Temperature change value setting
(“0”,”1”,”2”,”5”,”10” degrees optional, “0” locked the
soldering iron temperature)
“P05”: Set standby status (0 ~ 60 minutes, “0” disable
standby)
“P06”: Shutdown time (0 ~ 180 minutes, “0” disable
shutdown.)
“P07”: Temperature correction (+20 degrees)
“P08”: Wake mode selection (“0”, rotated the encoder
or shake the handle to wake up in the shutdown mode.
“1”, rotated the encoder to wake up.)
“P09”: Change the increase temperature in increase
mode to be adjustable (20 ~ 100 degrees adjustable)
“P10”: Change the time of enhancing temperature to
be adjustable. (10s ~ 250s)
“P11”: Change the effective time of automatically save
the parameters and return the function of the heating
mode to be adjustable. (4s~ 60s)
