Working Pressure: >=0.8MPa
Usage: Home DIY
Type: Hight Pressure Gun
Application: Garden Gun
Pressure Feeding Method: Pressure
Nozzle size: 2.5mm
Features:
- Specially designed components, extremely resistant, easy to disassemble, clean and maintain.
- High production efficiency, can greatly improve the coating efficiency of the coating savings, easy to operate.
- Wide application: for all painting works such as houses, garages, decks, furniture, fences for indoor or outdoor use.
- A faster and easier way to paint, this electric paint sprayer will make your painting jobs easier.
- Suitable for spraying all types of paint, including latex paint, oil based enamels, water-based paints, house paints and stains.
Material: Engineering Plastic
Paint Supply Method: Suction type
Mixing Mode: External mixing spray gun
Voltage: 110 / 220V, 50Hz / 60Hz
Power: 75W
Working Current: 0.4~0.6A
Paint Discharge Amount: 200ml/min
Use Operation:
- 1. Fill the liquid bottle with the spray. Connected to the 110V or 220V power supply, press the switch, the gun will start, there is a strong vibration shock sound, start spraying after a few seconds, and turn into a low normal working sound.
- 2. If it fails to work normally after starting, try to adjust the knob on the back. The method is: first screw the knob in and then slowly retreat, and test the pressure by hand at 50cm from the nozzle, which has strong hemp. (Note: After adjusting, don't just adjust it)
- 3. The effective distance of decontamination is 10-15cm between the nozzle and the object, and it is operated at a downward inclination angle of 45 degrees, and is sprayed repeatedly to remove the stain.
Maintenance:
- 1. The spray gun can work continuously, but it should also pay attention to temperature to avoid overheating damage.
- 2. the sound is normal but no jet, or the jet is weak, loose is the nozzle is blocked, the nozzle is unscrewed, the debris is removed, or the fine needle is gently smashed from the inside to the outside.
- 3. the injection is normal, but the pressure is not enough or unstable, you can open the handle cover to check whether the tightness of the pump is loose.
- 4. After the operation is completed, it is necessary to spray for a few seconds to spray the liquid in the pump, and then inject a few drops of oil from the oil hole and spray it for a few seconds.
Place of Application: Painting Jobs, Indoors, Outsides, Furniture Painting
Note:
- to reduce the risk of electric shock do not expose to rain .store indoors.
- warning risk of explosion do not spray flammable liquid risk of injection do not discharge directly against skin.
- Basically, the liquid that can flow can be sprayed. There is a certain requirement on the consistency. There is a funnel in the fitting. The funnel is full. If it can flow in 50 seconds, it means that the paint can be sprayed. Otherwise, it needs Diluted.
- After each work is completed, you must add thinner (such as banana water) to the tank, spray it with thinner several times, and spray the residual paint of the tank and the nozzle. This way, the gun nozzle will not block the next time it is used.
Product Weight: 890 G / 31.39 Ounces
Product Dimensions (L*W*H): 220*220*105 MM / 8.66*8.66*4.13 Inches
Package Weight: 850.0 G / 29.98 Ounces
Package Dimensions (L*W*H): 220*220*105 MM / 8.66*8.66*4.13 Inches
Retail Packaging: Yes, General Box
Package Including:
1 x Electric Spray Gun
1 x Spring
1 x Funnel
