Voltage:220V EU Plug
Power:130W
Speed:8000rpm-30000rpm
Collet Dia:3.0mm(use for 0.5-3.2mm shank)
There are six speeds that can be adjusted.
Usage:Polishing,engraving,grinding,cutting,drilling,cleaning,sanding,removing,sharpening.
There are seven kinds of packages for you to choose from.
Wide clamping range
Compatible with accessories of different specifications.
By changing the chuck, you can clamp 0.5-3.2mm accessories.
6 speed adjustment Speed as you like.
The speed is adjusted between 8000-32000 r/min.
Comfortable touch
Light body.Operation is more flexible.
Has a rich interface
Use according to different needs.
It can be installed together with flexible shaft, positioner, protective cover and lighting.
Accessories installation steps
1.Hold the spindle lock and open the nut with a wrench.
2.Insert the drill chuck and install the nut.
3.Put in accessories
4.Hold the spindle lock and tighten the nut with a wrench.
Flexible shaft installation steps
1.Unscrew the plastic nut
2.Take out the flexible core and insert the chuck
3.Tighten the soft shaft cap
4.Insert the small hole with the shaft hook. Then loosen the nut with a wrench.
5.Put in the accessories, hold down the shaft hook, and tighten the nut with a wrench.
