Tungfull mini electric drill accessories drill bits woodworking tools Variable Speed Electric Rotary Tool Mini Drill Grinder
Model:TH-109
Voltage:220V EU Plug /110V US Plug
Frequency:50/60hz
Power:130W
Speed:8000-32000RPM ( 6 speed control )
For DIY production, wood, metal, plastic, stone, etc.
Usage:Polishing,engraving,grinding,cutting,drilling,cleaning,sanding,removing,sharpening.
There are seven kinds of packages for you to choose from.
Wide clamping range
Compatible with accessories of different specifications.
By changing the chuck, you can clamp 0.5-3.2mm accessories.
6 speed adjustment
Speed as you like.
The speed is adjusted between 8000-32000 r/min.
Comfortable touch
Light body.Operation is more flexible.
Voltage: 220V/110V
EU Plug is for 220V voltage ,US Plug is for 110V voltage .
Has a rich interface
Use according to different needs.
It can be installed together with flexible shaft, positioner, protective cover and lighting.
Multifunctional New Experience
Professional accessories, one machine for multiple purposes.
Engraving
Diamond grinding needles of different shapes.
It is widely used in jade, ceramics, glass, stone and other materials,
used for fine Engraving, polishing and decoration.
Cutting
Equipped with cutting blades and saw blades.
Cooperating with high-speed machines,
it can easily cut various materials.
Drilling
With HSS drill bit, it can drill holes on paper, wood, jade and glass.
Polishing & Grinding
It can polish metal, plastic, jade, agate and wood.
It is very suitable for polishing small jewelry.
Cleaning
Can clean wood products, bodhi and walnuts. It can also derust rusty iron products.
Flexible use
Flexible shaft + Drill holder, more convenient.
Multifunction
The next DIY master is you .
Accessories installation steps
1.Hold the spindle lock and open the nut with a wrench.
2.Insert the drill chuck and install the nut.
3.Put in accessories
4.Hold the spindle lock and tighten the nut with a wrench.
Flexible shaft installation steps
1.Unscrew the plastic nut
2.Take out the flexible core and insert the chuck
3.Tighten the soft shaft cap
4.Insert the small hole with the shaft hook. Then loosen the nut with a wrench.
5.Put in the accessories, hold down the shaft hook, and tighten the nut with a wrench.
