4W 5V Solar Panel Waterproof Outdoor Camera Solar Panel 360° Adjustable Mount 2000mAh Rechargeable Battery with 4m Charging Cable&Rubber Plug for Blink Outdoor 4 (4th Gen)
Feature:
1. Dedicated Design: Specifically designed for Blink Outdoor 4 (4th Gen),this solar panel features a dedicated Type-C interface, providing an ideal uninterrupted power source for camera. It converts sunlight into energy to keep your camera powered continuously (remove the camera's battery before use). Note: Not suitable for Blink Indoor 4 or other camera models.
2. Built-in Rechargeable Battery: The solar panel charger comes with a built-in 2000mAh rechargeable battery. Once fully charged, it automatically charges your camera to prevent unstable charging caused by sunlight exposure. It can even continue charging the camera on cloudy days (after the battery is fully charged),providing better protection for your camera.
3. High-Efficiency Charging: This outdoor camera solar panel delivers up to 5V 1A current and 4W (maximum) power output, ensuring high energy conversion efficiency. Made with monocrystalline silicon, it efficiently charges the solar panel even in direct sunlight. The built-in intelligent IC provides protection against overcharging, overheating, overvoltage, and short circuits, ensuring safe and continuous charging.
4. IP65 Weatherproof: With an IP65 weatherproof rating, the solar panel kit is made of monocrystalline silicon material, while the frame and bracket are made of plastic. It can withstand heavy snow, rain, and other harsh weather conditions. The special rubber plug ensures a sealed connection between the camera and the charging cable, preventing water from entering the camera  .
5. Easy Installation: The solar charging panelcharges the camera (after removing the battery) using sunlight. It can be installed anywhere outdoors. Simply drill a hole in the wall, mount the 360° rotatable bracket, position the solar panel towards direct sunlight, and insert the Type-C charging cable with a waterproof rubber plug into the port on the back of the camera. Before connecting the solar panel, remove the battery from thecamera. Partially covering the solar panel will affect its power generation efficiency. Sunlight intensity varies by season and weather, impacting the power generation. Adjust the solar panel's direction in real-time to maximize sunlight exposure. Slightly tilt the solar panel to prevent leaves, water, or dust from accumulating on its surface. Regularly wipe off leaves, dust, and rain streaks from the surface of the solar panel to prolong its lifespan.




Specification:
Origin: Mainland China
Certification: CE
Type: Solar Panel
Number of Panels: 1
Material: Monocrystalline Silicon
Max. Power: 4W
Module Efficien: 21.8%
Color: black
Quantity: 1 set
Power: 4W(max power)
Material: monocrystalline silicon, rubber
Surface: ETFE lamination process
Operating Voltage: 5V
Operating Current: 600mA
Model: for Blink Outdoor 4 (4th Gen)
Internal Battery: 2000mah, Regulated 5V Output
Connector: Type-C with waterproof rubber stopper
Cable length: 4m
Size: 200*140*10mm/7.87x5.51x0.79inch
Weight: 365g

Warm Tips:
Please check if your camera model is for Blink Outdoor 4 (4th Gen) before buying the solar panel.
Before use:
Connect the solar panel for Blink camera (take out the battery inside the camera),then place the solar panel holder in a sunny place to charge for 1-2 days, then it can be used normally.
Caution:
If the solar panel is partially covered, it will affect the power generation efficiency of the solar panel.
Different sunlight intensity in different seasons and weather will affect the power generation. Please adjust the direction of the solar panel in real time to get the maximum sunlight.
Please tilt the solar panel slightly to avoid leaves, water or dust falling on its surface. Please wipe the leaves, dust and rain marks on the surface of the solar panel regularly to prolong the service life of the solar panel.