Product Overview:

1. The controller is a wired controller for XBOX ONE/X/S, connected to the host via USB; Handle support motor vibration; After the controller communicates with the console, the xbox button (LOGO light) lights up.

The handle has a 3.5mm stereo jack to connect the headset and microphone, allowing the user to receive and transmit audio at the same time;

Support wired PC XINPUT;

2. The handle consists of 16 numeric keys:

(UP, DOWN, LEFT, RIGHT, A, B, X, Y, LB, RB, L3, R3, menu, View, HOME, share key);

3. Composed of two simulated 3D rockers;

4, 2 Trigger keys with analog (Hall IC mode)(LT,RT);

5. Two programmable buttons on the back;

6, left and right grip with motor, without trigger motor.

Mode and connection description:

a: The XB-024 controller perfectly supports windows PC platform (Windows10 or above) and XBOX ONE console platform, plug and play, no additional drivers need to be installed.

b: Power on the Windows PC or XBOX ONE host, insert the USB cable of the XB-024 controller into any available USB port, and the Windows 10 or a later system will automatically load the driver. After the installation is complete, the controller is successfully connected and can be used normally.

Note :3.5mm stereo jack can connect headphones and microphone.

Key programming (mapping) mode Operation steps:

1. Hold down the Programming mode button for 2 seconds, and the xbox button will glow with LOGO slowly, indicating that the controller has entered the programming mode;

2. Press any of the following buttons that you want to be programmed (mapped) :A/B/X/Y/LB/RB/L3/R3/D-PAD,xbox key flashing LOGO;

3. Press any one of the left and right programmable keys (left or right programming keys),and the xbox key's luminous LOGO changes from a quick flash to a long bright, indicating that the button programming (mapping) is successful;

Note: Program up to 16 keys, more than 1 minute no keys, automatically exit the programming mode;

4. To program the next button, repeat the above 3 steps.

Note: After reinserting the USB head, the initial state is restored.

Clear programming (mapping) functionality:

1. Hold down the programming button for 2 seconds, and the xbox button will glow with LOGO slowly blinking, indicating that the controller has entered programming mode;

2. Press the programming button again for 5 seconds, and the LOGO illuminated by the xbox key flashes longer and brighter, indicating that all programming (mapping) functions are cleared.

TURBO functions:

The joepad supports the continuous transmission function and the adjustment of the continuous transmission speed. Press a function key when holding down the TURBO key, and press the function key after releasing it to enable continuous transmission (the Turbo indicator blinks when the Turbo key is pressed). If you hold down the "TURBO" key for the second time and press the function key, the key will automatically repeat the function. You can press the key when you need to pause the automatic continuous transmission. To disable the continuous sending function of this key, perform the preceding steps again, or hold down the TURBO key for 3 seconds to disable the continuous sending function of all keys. Re-plugging the USB head can also cancel all TURB0 features. Press and hold down the "TURBO" button on the handle while performing the right 3D up and down operation to adjust the speed of continuous transmission in three gears: fast, medium, and slow. The default is slow.

Left and right rocker RGB light mode adjustment operation:

1, light key +R3: mode adjustment, 3 mode sequence switch on, breathing horse, magic color,

2, light key +L3: steady on mode: switch color, breathing mode: no effect, magic mode: fixed display current color/dynamic color switch

3, at the same time long press the 3D rocker L3+R3 key combination for 3 seconds, the motor vibration for 1 second prompts you to set the color of the RGB aperture; At this time, press the L3 key once every short time to switch the RGB light color in turn (color order is: colorful breathing cycle, blue, red, pink, orange, yellow, cyan, purple, off); When switching to the desired light color, press the R3 key to confirm, and the motor will vibrate for 1 second. If you do not press the R3 key to confirm, the handle will automatically confirm and exit after 10 seconds, and the motor will vibrate for 1 second.

1. [high-quality 3D rocker] Low friction aperture, more flexible operation, more accurate positioning

2.【Turbo】 Semi-automatic, fully automatic, continuous transmission function, better game experience

3. [Dazzling breath light] 7 colors, while switching monochrome long bright, monochrome breath light

4. [High quality elastic silicone button] Light and crisp feel, very relaxed game experience

5. [Light control key] can switch the light at the same time, you can also switch the light effect of different colors according to your preferences

6. [Programming mode key and programming key] can combine different function keys together, so that you can enjoy the glory of the king in the game

7. [Laser non-slip texture grip] more comfortable to use