450ml Silica Gel Air Filter and Dryer 1pc Starts Simple to Install For Tube Ozone Generator Below 30g/h + Free Shipping

Introduction:
The air dryer is to absorb the extra moisture and dust in the air, make sure the feeding source for the ozone tube is dry and clean, so as to increase the ozone concentration and life span.  
The two ends of the dryer can be disassembled, easy for maintenance.  

The volume:450ml
Diameter:50mm
Tube length:250mm.
Outer diameter of the air faucet:8.3mm (need soft silicone tube 5*9mm to connect. we can offer 1meter for free. )
Recommend installation position: in a position inside ozone equipment, easy to inspection and disassemble.
Working temperature: 0-50 degree. Working pressure: 0.1Mpa

Using method:

One air faucet connect to air pump, the other air faucet connect to inlet of the ozone tube.

Maintenance: Initially the silica gel particles color is blue, after a period of time of   moisture absorption, they turn red. When the red is semitransparent, it means the silica is saturated with moisture, it is the time to take out all the silica gel, after drying it to blue color, then we can reuse it.