Product Parameter
Rated Voltage :AC220V-240V(Customization 110V please contact Customer Service)
Plug: CN (Customization AU/EU/UK/US please contact Customer Service)
Flame Color : Flaming Yellow(please contact Customer Service if you need other flame colors)
Control Mode: All series are equipped with super touch screen and remote control
The Water Filling Systems :Fill with water automatically
Fuel: Purified water or filtered tap water
Working hours :7-12 hours
Light Source : Halogen Bulb
Rated Frequency : 50-60hz
Overheating Protected : Yes
The Remote Controller : Yes
Atomlzatlon Method : Ultrasonic
Power Source : Electric
Service : Support OEM /ODM.
Fuel: Pure water
warranty : 5 years
How to water ?
Automatic Water :
1. Open the cover on the panel.
2. Insert one end of the water pipe into the water inlet, the other end into the water, press the water button on the panel (press one time to add water, press three times to drain).
Note: If the drain port is not inserted into the water pipe remember not to press long, otherwise the water is easy to drain into the box causing a short circuit on the motherboard.
Safety and environmental protection ,the flame is touchable .
Multi-Color flame for option ,you can select what you like
How to instal , it is easy to install the firplace , if you need video to show
how to install ,please contact us
Built-in socket(fireplace length 1 m for example)
Fireplace mounting hole size: length 970mm * width 210mm * height 230mm (hollow inside) The socket installed on the inner wall or side and its bottom cannot occupy the space atthe bottom of the fireplace.
Precautions:
1.The countertop and interior decoration of the place where the fire place installed must be moisture-proof and cannot use moisture-prone materials
2.The reserved installation slot : length 970MM* width 210MM* depth 230MM or more .
3.Leave a socket in the groove.
4.The top of the fireplace can not use reflective materials.
5. The installation surface of the fireplace must be horizontal and cannot be tilted.
6.Please add purified water or filtered tap water to prevent the fog outlet from being blocked.
lnstructions for lnstallation
1.3D atomized fireplace should be installed horizontally in a place that is not easy to move, fixed position, air Small convection.
2.The atomized flame is easily affected by the outside environment and the startup time is longer in winter.Only when the fog rises, there is often wind blowing in the installation place,which will also affect the color and shape of the flame.
Intelligent remote control is easy to use
Scenarion Shows
Our Factory workshop :
More plugs for option , if you need ,please contact us
Test certificate
