Please note: If there are problems after receiving the product installation, please do not rush to file a dispute, return or refund! You may be experiencing installation issues or remote control2.4G Fan Lamp Infinite dimming controller:
Output power: ( 30-50W)X 2W
Output current; 200mA
Output Voltage; 110-180V
Input voltage: 185-265V 50-60HZ
Please note: the controller is only suitable for bedroom fan lights, not for invisible ceiling fan lights!
2.4G Fan Lamp Infinite dimming controller:
Output power: ( 30-50W)X 2W
Output current; 220mA
Output Voltage; 110-180V
Input voltage: 185-265V 50-60HZ
Wind guide drive:
matching issues.
Please follow the following steps to test:
Pairing process:
Turn off the wall power and then turn it on again.
Simultaneously press and hold the light switch and fan high gear button.
Hearing a beep indicates successful pairing.
Check if the battery in the remote control is low or installation error.
Parameters:
Input voltage: 180-265V AC 50/60 HZ
Output voltage: 72-180V
LED output power: ( 24-50)*2
Rated power of motor: ≤ 40W
LED output current: 220MA
Built-in drive capacitor: 1.2UF
Transmission frequency: 2.4G
Remote control distance: ≥ 20M
Remote control battery model: 23A( 12V)
2.4G wireless digital technology, one-on-one control, remote control distance, all-round partition wall remote control
Please scan the following QR code to download APP
Please note:
1. There is high voltage inside the host, non professionals are not allowed to disassemble it
When equipped with a pull switch type wall switch, the switch must be turned on in order for this product to operate remotely.
3. When remote control is not possible, please check if the battery contact is normal, if the position is reversed, and if the power is sufficient.
4. When not in use for a long time, please turn off the power of the host and remove the remote control battery.
iphone Version:
