FIXDRY Extra Large Dry Box, Filament Dryer, Compatible with 1.75mm, 2.85mm, 3.00mm 3D Filament: DRY FAST, EXTRA LARGE, HIGH TEMPERATURE
Extra Large Homothermic Box
NT1 has a large inside space, Can use 2 rolls of 1kg filaments/1 roll of 3kg filament at the same time, Suitable for multiformat filaments which iinclude1.75mm/2.85mm/3mm
Excellent drying effect
In the filament dryer, we use a 110W PTC heater to heat up space which is rare and inimitable in the market. As we know, most filament dryers are using a 48W PI heating pad to heat up space that cannot dry evenly. However, the same problem won’t occur in NT1 because of our PTC heater technology. PTC heater is also known as durable, energy-saver, and environmentally friendly.
Adjustable heating temperature
The drying temperature can be set and the operation process is simple. The temperature can be set in a wider range, up to 70°C.
Optimized heating method/Real-time temperature monitoring
Hot air heating makes drying more efficient; the unique air duct design makes NT1 conform to the principle of air thermodynamics, and the filament is heated more evenly. Within 2s after setting the temperature, the temperature panel will display the internal temperature in real time
Real-time humidity monitoring
Independent Electronic humidity detector， digital display. The measuring range is from 10%to 99%. At the time when NT1 is working, the humidity inside the box can drop to as low as 10%.
Product Description
Features
Extra Large Homothermic Box
NT1 has a large inside space, Can use 2 rolls of 1kg filaments/1 roll of 3kg filament at the same time, Suitable for multiformat filaments which include 1.75mm/2.85mm/3mm
Adjustable heating temperature
The drying temperature can be set and the operation process is simple. The temperature can be set in a wider range, up to 70°C.
Optimized heating method
Hot air heating makes drying more efficient; the unique air duct design makes NT1 conform to the principle of air thermodynamics, and the filament is heated more evenly.
Closed-loop constant heating
Real-time monitoring of the temperature in the box, keeping the temperature in the box constant by using the closed-loop intermittent heating mode
Heating time can be set freely
The heating time can be set based on your requirement， the countdown setup is from Oh to 48 hours and the shutdown is accurate to minute. You can set unlimited heating as well. In this setting， NT1 is in the normally open state.
Fire retardant material
The core components of NT1 are made of VO flame-retardant materials.This will make NT1 even safer.
Real-time humidity monitoring
Independent humidity detector， digital display. The measuring range is from 10%to 99%. At the time when NT1 is working, the humidity inside the box can drop to as low as 10%.
Blow-proof Shroud
When you only dry the printing filament and do not print at the same time, use the shroud to prevent the hot air from blowing the printing filament directly and causing deformation.
Unique appearance design
NT1 is designed with a sense of technology, using the visible top cover and a stainless steel anti-fingerprint metal base to let the user is able to clearly understand the current remaining material status.
Drying & printing same time.
NT1 is able to achieve drying while printing. A total of 8 holes are set on the shell to make multi-directional outlets possible in order to satisfy the use of various types of printers or multiple printers used at the same time.
Product Safety Certificates
NT1 has CE, UKCA, FCC, ROHS, PSE, and REACH Certificates.
Product Parameter
Input Voltage： AC 100V -240V 50/60Hz
Rated Power：110W Standby power：2W
Working temperature：10-35℃
Working humidity：≤90%
Product Size：277x200x328.5mm Net Weight：1.5kg
Package Size：284x216x347mm Total Weight：2.0kg
Humidity range： RH10%~99%
Temperature Control Range：40~70℃
Maximum Capacity： Double Reels<φ217x80mm
Single Reel<φ217x174mm
Filament Diameter：1.75mm/2.85mm/3mm
Package Included:
1*Dryer NT1
