Features1:
◎Standard 1U light and thin can be mounted on the rack
◎Two-channel synchronous control 31-band DSP processing equalizer
◎Each segment with LED spectrum indicator, real-time 3 1-segment class point absolute accuracy 99%
◎With cutting-edge noise gate noise reduction function
◎The input and output interface supports multiple types: TRS6. 35/RCA lotus/XLR card with CANON balanced interface
◎EQ bypass: Bypass the graphic equalizer in the signal path
◎With save and recall function, multiple modes can be saved and recalled.
◎USB interface can be input to the computer for control point output.
Parameter:
Power supply mode: 220V
Sound transmission gain ratio: -12dB to 12dB
Line input impedance 15KQ
Line output impedance 3000
Frequency response 20Hz-20KHz
S/N ratio 92dB
Power consumption 20W
Features2:
1. SAVE button: Operate and press once to enter the SAVZ storage state. There are 1-16 memory selection function keys to switch
among the displayed content, 1-16 types for storage confirmation, long press the SAVZ key to enter the RELOAD MODE mode, long
press to confirm the reset operation .
2. BECALL button Operate a short press to enter the RECALL FROM recall mode, select the function key to call out 1-16 memory
storage modes as the current mode, long press the RECALL key to adjust the EQ parameter state for mixing, and long press to exit
the state.
3. EQ/BYPASSI button: Press once to enter E0 parameter value adjustment content status selection function key to enter EQ
parameter value 20Hz-20KHz, content adjustment, the content included range (EQ FRE. frequency value 20Hz-20KHz) is 3 1 segment
value confirmation adjustment , CAIN is the frequency gain adjustment of each section. DELAY is the time delay adjustment of the
output channel. VOL OUT is the output channel volume value plus or minus adjustment. HIGH PASS is the high pass filter (20Hz -50Hz
range). LOw PASS is the low channel filter (5KHz) -20KHz range) Long press EQ/BYPASSI to (PASS) through test output.
4. Display level: for music dynamic [E0 input level value jump display and adjustment output 10Hz. 20KHz gain plus or minus 31
segment adjustment
5. Operation content display screen.
6. Select the function switch key: press directly to switch the left and right state to adjust the input volume level and sound,
and press it to confirm the exit volume value.