Highlight description:

1. [Durable] The switch is made of aluminum and plastic, durable and practical, easy to install and remove.

2. [Easy to Regulate] The main function of the chamber is to regulate the air compressor shutdown and start pressure. The working pressure is 90-120PSI.

3. [Easy to Use] The air regulator on both sides of the copper is an exhaust hood that opens the gas when in use.

4. [Safety Valve] The red color on the right side is the safety valve. Users can adjust it according to the actual situation.

Detailed description:

Name: Compressor Pressure Switch
Material: Aluminum, plastic
Color: As shown
Rated Voltage: 220/380V
Exhaust Pipe: About 6mm
Contact Mode: Normally closed
Bracket Size: (approx.) 135mm
Bracket Connector Size: 20mm
Outside Diameter of Pressure Relief Port: 9.5mm
Maximum Current: 20A
Working Pressure: 5-8KG (90- 120psi)
Switch Pressure Range: 0.5 -0.8 mpa (5-8BAR) (90-120PSI)
Volt240-Amp.20-MaxBar12-PSI175 is printed on the switch box
Pressure is not adjustable

Parts List:

1 x Compressor Pressure Switch

Notes:
1. Due to the difference between light and screen settings, the color of the item may differ slightly from the pictures.
2. Please allow for slight measurement deviations due to manual measurements.