DR-E8 LP-E8 Fake Battery+5V USB Power Adapter Cable For Canon EOS Rebel T2i T3i T4i T5i 550D 600D 650D 700D Kiss X4 X5 X Camera
Input: 5V 2-4A
Output: 8.4V
Conversion efficiency: 92% (DC-DC Efficient conversion rate)
USB plug Specifications: USB2.0
Length: about 120 cm (Can be customized)
Descriptions:
1. In order to optimize your camera's work, use high-quality mobile power, mobile power needs to output 5 volts 2A / 4A current. When the power or current is insufficient, you can't shoot. Please choose at least better current.
2. The mobile power has an automatic sleep mode and is turned off.
3. Do not use computer USB, because the computer USB 2.0 output voltage is mostly 5v, but the current is less than 500mA current.
4. Some mobile phone/tablet USB charger and resistance recognizer, do not know the camera, the current can not meet the requirements, so it is not recommended.
5. Use the camera for a long time to set the camera standby time to the maximum standby time.
SUITABLE FOR:
For Canon EOS Rebel T2i / Canon T2i / Rebel T2i
For Canon EOS Rebel T3i / Canon T3i / Rebel T3i
For Canon EOS Rebel T4i / Canon T4i / Rebel T4i
For Canon EOS Rebel T5i / Canon T5i / Rebel T5i
For Canon EOS 550D / Canon 550 D
For Canon EOS 600D / Canon 600 D
For Canon EOS 650D / Canon 650 D
For Canon EOS 700D / Canon 700D
For Canon EOS Kiss X4 / Canon X4
For Canon EOS Kiss X5 / Canon X5
For Canon EOS Kiss X6 / Canon X6
And more model
If you use "DC drive cable" and Power Bank:
We notice a buyer feedback that, use our prodcuts can start his camera, but when shooting, the camera shut down. we'd like to explain here, we provide the the DC coupler and the USB cable adpater only. For this customer's case, proves our products can successfully connect the power, and the cable adapter successfully improves the voltage. But when shooting, the camera shut down, this the power source's problem.This situation,Please use a power source at least DC 5V 2.4A, DC 3A is better. To solve this problem, you just need to change a power source.
Choose a quality power bank, there are too many power banks on the market. There are some mobile power parameters that mark the fake output, they don't allow to draw higher current, when you shoot, it's bond to draws higher power than you start the camera, then the power bank stop supplying the power, then the camera shut down. We recommend: such as the Xiaomi 20000mAh (model: PLM05ZM),which allows maximum DC output DC 5.1V 3.6A, Xiaomi 10000mah Pro (model: PLM03ZM) or Zmi 20000mah (model:QB820),CHOETECH 10400mAh (model:B618T) and other well-known and reliable brand. Recommended 5V USB power port current 2.4A and above, 3A is better. some power supplies use chips that support large current discharges, such as the 10A switching current of the TI chip TPS61088, fits instantaneous high power needs of the camera.
Tips: General digital battery printed above parameters 7.2V / 7.4V labeled battery, it is the camera's minimum operating voltage, these batteries need to use 8.4V charger, full of power, charger 8.4V said no-load voltage, operating voltage and no-load voltage are two different concepts. External power used in the camera, You need to have enough power to supply, the camera is a load,the operating voltage is far lower than the no-load voltage.Therefore, the Camera adapter's no-load voltage is usually between 8V-9V (Note: the multimeter test is no-load voltage).
(DC drive cable,customized production,strict inspection,High quality chip,efficient conversion rate.)
Low input costs, Replace battery grip , suitable for indoor and outdoor.
(Please Read Before ordering)
[Big order]
If you order more, contact us.we will give you a reasonable discount.
Welcome to visit our shop for more accessories, if you need wholesale lots,please feel free to contact us, We are right here waiting for you.
