Product Introduction:
1. The usage method is simple, RCA in RCA out, or XLR in XLR out. The sound source can be an amplifier, mobile phone, computer, etc;
2. Rich usage scenarios, such as home theaters, studios, and esports, bring you "visible music";
3. It cannot be used as a professional testing instrument, it is not a tool. Positioned as a spectrum analyzer for individual music enthusiasts, it enhances the atmosphere of listening to music. Show a beautiful rhythm. In order to achieve a better visual experience, the engineers' software algorithms have been optimized;
4. It is the painstaking work of my team and is willing to bring more joy to music enthusiasts!
Music spectrum analyzer （Professional Edition）
The music spectrum analyzer is a professional audio analysis device. It uses
the Fourier algorithm to analyze the audio data and displays it in the
corresponding frequency position. Using ARM-CortexM4 processor inside,
touch or remote control, can display a variety of modes.
Parameters:
●Voltage: AC100-240V
●Max Curren: 0.2A
●Frequency Reponse:20Hz-20KHz
●Sensitivity:>-40dB(94dB SPL @1KHz)
●Product Size:430*88*135mm
●Weight:2500g
Features:
●Sterec audio input or built-in microphone
●Touch or remote control to switch modes
●A built-in clock
●Intelligent environmental noise cancellation
●Brightness/ speed/gain adjustable
●Smooth display
●Silent auto sleep
●Automatic gain control
Instructions：
Power On——
1. Plug in the AC power plug and turn on switch;
Power Off——
Remote control power button for stanby or fower-on;
Automatically enter the time display after muting about 6S, and automatically turn on when there is a sound;
Tuning parameter——
1. Touch the Menu key or the Mlenu key of the remote control to select a menu item;
2.VOL+/VOL-key adjustment options;
3. Press the button on the remote control to cancel the menu or wait for 5 seconds,the menu will disappear automatically;
Sensitivity adjustment——
During normal use, press VOLt/OL- key to increase or decrease the sensitivity;
range: 0-19;
The adjustable potentiometer on the back ot the fuselage can adjust the line gain,which is only valid for line input;
Clock ad justment——
1. Enter time display mode (MODE: 9)
2. The vOL-Key selects the position, and the voLt key selects the number;
Menu description:
MODE—— -Display mode selection, starting from 0:
0: Ordinary spectrum, two channels are mixed.
1: On the basis of mode 0, the peak recording point is added to the top, and the acceleration decreases after a delay;
2: The ordinary spectrum is equally divided screen, and the two channels independent display;
3: On the basis of 2, the peak recording point is added, and the acceleration decreases after the delay, similar to mode l;
4: Similar to 2, but thethe base line is the center horizontal line;
5: Similar to 3, but the the base line is the center horizontal line;
6: Similar to 5, but only shows peak points;
7: Waterfall chart with frequency on the x-axis and time on the y-axis;
8: Waveform, binaural mix, x-axis is time. y-axis is amplitude, bottom I row is real-time amplitude;
9: Similar to 8, the base line is the bottom;
10: Similar to 8, the upper and lower two channels are displayed separately;
11: Level indicator, displayed horizontally from the center to the sides;
12: Similar to 11, with added peak point;
13: Clock mode, 2 channel levels are shown at the bottom;
SPEED--Speed setting, 0-4 affects the falling speed of the floating point from slow to fast, the horizontal movementspeed, etc.
DIMMEF—— -Brightness selectior, five levels of brightness from 0 to 4;
GAIN——Gain setting, range: 0-19 The gain is gradually increasec;
SMOOTH—— Smoothin setting, 0: no smoothin; 1: linea r smoothi; 2 quadratic function fitting
LEARN——Noise learning settings, press VOL+ to enter the noise learning mode, and the bottom displayA horizontal line, any sound produced in this process will be sampled as noise and saved. This part of the sound will be filtered out during actual display. After about 30 seconds, the sampling will end and the display will return to normal. and restore GAIN to 0;
DEMO——Demo mode, after a few seconds of each mode demonstration, it will automatically switch to the next mode, "0" is off, "1" is on;
MIC——Whether to turn on the pickup, "0" is off, "1" is on;
AGC- Automatic Gain Control, 0: Disablec; 1: Enablec; AGC can Provide negative feedback of gain to the input terminal according to the magnitude of the display amplitude, the feedback period is about 5s, in order to automatically adjust the display amplitude in the appropriate range;
SLEER—— -Sleep setting; 0: no sleep; 1: mute automatic display clock;
FACTORY1: All parametertrese to factory settings, including noise data.
Option Description:
MODE——Display mode selection, starting from 0 as follows:
0: Normal spectrum, the two channels are mixed, and the frequency is displayed in order from 20Hz to 20KHz;
1: On the basis of mode 0, the peak recording point is added to the top, and the acceleration decreases after a delay;
2: The common frequency spectrum is equally divided up and down, and the upper and lower two channels are displayed separately;
On the basis of 3:2, the peak recording point is added, and the acceleration decreases after the delay, similar to mode 1;
4: Similar to 2, but the reference point is the center horizontal line;
5: Similar to 3, but the reference point is the center horizontal line;
6: Similar to 5, but only the peak point is displayed;
7: Waterfall chart, x-axis is frequency, y-axis is time;
8: Waveform graph, two-channel mixing, the x-axis is time, the y-axis is amplitude, and the bottom 1 is the real-time amplitude;
9: Similar to 8, the base line is the bottom;
10: Similar to 8, the upper and lower two channels are displayed separately;
11: Level indicator, the middle is displayed horizontally to both sides;
12: Similar to 11, with the addition of the peak point;
13: Clock mode, bottom two-channel display level;
SPEED——speed setting, 0-4 affects the speed of floating point falling from slow to fast, horizontal movement
speed, etc.;
DIMMER——Brightness selection, there are five levels of brightness from 0 to 4;
GAIN——Gain setting, range: 0-19 Gain gradually increases, default value: 0;
SMOOTH——smooth setting, 0: not smooth; 1: linear smooth; 2: quadratic function fitting
LEARN——Noise learning setting, press VOL+ to enter the noise learning mode, at this time the bottom display
A horizontal line, any sound made during this process will be sampled as noise, saved, and the actual
This part of the sound will be filtered out during display, and the sampling will end after about 30 seconds, and the display will return to normal.
GAIN=0;
DEMO - demo mode, each mode automatically switches to the next mode after a few seconds of demonstration;
MIC——Whether the pickup is turned on, 0: off; 1: on;
AGC——Whether to enable automatic gain control, 0: off; 1: on; automatic gain control can
Provide negative feedback of gain to the input terminal according to the magnitude of the displayed amplitude, the feedback period is about 5s, so as to automatically adjust
The whole display range is in the appropriate range;
SLEEP——sleep setting; 0: no sleep; 1: mute automatically display the clock;
FACTORY——1: All parameters are restored to factory settings, including noise data.
Precautions:
1. Do not connect to a power supply higher than 240v, so as not to damage the motherboard, please use the power cord certified by the relevant agency;
2. Do not immerse in water, or use in conditions with humidity higher than 90%;
3. Do not use any solvent or liquid other than anhydrous alcohol to wipe the screen;
4. Non-professionals should not disassemble by themselves, and product failures caused by non-quality problems are not covered by the warranty;
5. Please place it out of the reach of children 6 years old and below;
6. Subsequent changes and new functions will be added without prior notice;
