(Without memory function) 5V Plug-in/Rechargeable RGB Colorful Light 32 LED Voice-activated Pickup Atmosphere Light Bar Car Light Strip Pickup Desktop Party Decoration Prop Feature: This lamp has no memory function. After power failure recovery, it will become the first factory mode and the first color; Matching is a 16-bit ARM 8-pin chip. Multi-mode display soft light design. There are 32 colorful light beads, with no less than 8 display modes, with 5-level adjustable brightness and 5-level adjustable speed. Support intelligent noise reduction. With AGC automatic gain control and intelligent denoising algorithm, it can be used in noisy environment. Built-in microphone (voice control). Voice control senses beating rhythm, showing unique style and improving atmosphere. Follow the rhythm. Power supply methods is optional. USB plug-in or built-in rechargeable battery, you can choose to fully charge the built-in rechargeable battery, or plug in the connection. Multi-purpose scenarios. Good partner for car/desktop/home speakers/games/outdoor parties. Description: The music level lamp adopts acrylic one-time molded shell, with 32 colorful lamp beads inside, matched with MIC dedicated for music and a 16-bit ARM 8-pin chip processor. Realize the dynamic expression of music and sound field. Principle: The pickup lamp automatically senses external music through the built-in microphone, synchronizes music frequency, lights up RGB full-color LED lamp beads, presents dynamic light effect, and realizes visual effect on music. Specification: Type: D08-RGB material Material: ABS+ electronic components Color: White/Black (optional) Style: USB 5V power supply/rechargeable battery (optional) USB 5V power supply: be plugged in, without batteries. Rechargeable battery: Built-in 250mah battery, can be plugged in or fully charged. Chip type: 16-bit ARM 8-pin chip With APP or Not: without APP Input voltage: > DC 5V 1A Input interface: USB. Frequency: 50-16KHZ Dimension: 181*181*16*18.5mm/7.1x7.1x0.63x0.73in Net weight: 45g Software support: AGC, Intelligent noise elimination, Firmware update (upgrade via built-in serial port) Function: 12 dynamic horse racing modes +18 voice control modes Uses: car/desktop/home speaker/game/outdoor party, etc. Description: MODE/SPEED key: press briefly to turn the white to select the mode. Long press to turn red-select 5 speeds. COLOR/BRIGHT key: press white briefly to select color; Long press to turn green-select level 4 brightness at the same time. Press two keys: press blue at the same time-learn the ambient noise spectrum. Press and hold COLOR at the same time to enter the gain setting mode. Power-on (battery model only): Press the COLOR key after power-off. Turn off (battery models only): face down for 3 seconds. Tips: 1. Do not access a power supply higher than 5V, so as not to damage the motherboard. Please use the power supply equipment certified by relevant institutions. 2. Do not immerse in water, or use it under the condition of humidity higher than 90%. 3. Do not use any solvent or liquid except absolute alcohol to wipe the screen. 4. Non-professionals should not disassemble it by themselves. Product failures caused by non-quality problems are not covered by the warranty. 5. Do not use it for children under 6 years old. 6. Unplug the power supply when not in use. Note: This lamp is matched with a 16-bit ARM 8 pin chip. This lamp has no memory function. After power failure recovery, it will become the first factory mode and the first color. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. (Without memory function) 5V Plug-in/Rechargeable RGB Colorful Light 32 LED Voice-activated Pickup Atmosphere Light Bar Car Light Strip Pickup Desktop Party Decoration Prop Feature: This lamp has no memory function. After power failure recovery, it will become the first factory mode and the first color; Matching is a 16-bit ARM 8-pin chip. Multi-mode display soft light design. There are 32 colorful light beads, with no less than 8 display modes, with 5-level adjustable brightness and 5-level adjustable speed. Support intelligent noise reduction. With AGC automatic gain control and intelligent denoising algorithm, it can be used in noisy environment. Built-in microphone (voice control). Voice control senses beating rhythm, showing unique style and improving atmosphere. Follow the rhythm. Power supply methods is optional. USB plug-in or built-in rechargeable battery, you can choose to fully charge the built-in rechargeable battery, or plug in the connection. Multi-purpose scenarios. Good partner for car/desktop/home speakers/games/outdoor parties. Description: The music level lamp adopts acrylic one-time molded shell, with 32 colorful lamp beads inside, matched with MIC dedicated for music and a 16-bit ARM 8-pin chip processor. Realize the dynamic expression of music and sound field. Principle: The pickup lamp automatically senses external music through the built-in microphone, synchronizes music frequency, lights up RGB full-color LED lamp beads, presents dynamic light effect, and realizes visual effect on music. Specification: Type: D08-RGB material Material: ABS+ electronic components Color: White/Black (optional) Style: USB 5V power supply/rechargeable battery (optional) USB 5V power supply: be plugged in, without batteries. Rechargeable battery: Built-in 250mah battery, can be plugged in or fully charged. Chip type: 16-bit ARM 8-pin chip With APP or Not: without APP Input voltage: > DC 5V 1A Input interface: USB. Frequency: 50-16KHZ Dimension: 181*181*16*18.5mm/7.1x7.1x0.63x0.73in Net weight: 45g Software support: AGC, Intelligent noise elimination, Firmware update (upgrade via built-in serial port) Function: 12 dynamic horse racing modes +18 voice control modes Uses: car/desktop/home speaker/game/outdoor party, etc. Description: MODE/SPEED key: press briefly to turn the white to select the mode. Long press to turn red-select 5 speeds. COLOR/BRIGHT key: press white briefly to select color; Long press to turn green-select level 4 brightness at the same time. Press two keys: press blue at the same time-learn the ambient noise spectrum. Press and hold COLOR at the same time to enter the gain setting mode. Power-on (battery model only): Press the COLOR key after power-off. Turn off (battery models only): face down for 3 seconds. Tips: 1. Do not access a power supply higher than 5V, so as not to damage the motherboard. Please use the power supply equipment certified by relevant institutions. 2. Do not immerse in water, or use it under the condition of humidity higher than 90%. 3. Do not use any solvent or liquid except absolute alcohol to wipe the screen. 4. Non-professionals should not disassemble it by themselves. Product failures caused by non-quality problems are not covered by the warranty. 5. Do not use it for children under 6 years old. 6. Unplug the power supply when not in use. Note: This lamp is matched with a 16-bit ARM 8 pin chip. This lamp has no memory function. After power failure recovery, it will become the first factory mode and the first color. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. (Without memory function) 5V Plug-in/Rechargeable RGB Colorful Light 32 LED Voice-activated Pickup Atmosphere Light Bar Car Light Strip Pickup Desktop Party Decoration Prop Feature: This lamp has no memory function. After power failure recovery, it will become the first factory mode and the first color; Matching is a 16-bit ARM 8-pin chip. Multi-mode display soft light design. There are 32 colorful light beads, with no less than 8 display modes, with 5-level adjustable brightness and 5-level adjustable speed. Support intelligent noise reduction. With AGC automatic gain control and intelligent denoising algorithm, it can be used in noisy environment. Built-in microphone (voice control). Voice control senses beating rhythm, showing unique style and improving atmosphere. Follow the rhythm. Power supply methods is optional. USB plug-in or built-in rechargeable battery, you can choose to fully charge the built-in rechargeable battery, or plug in the connection. Multi-purpose scenarios. Good partner for car/desktop/home speakers/games/outdoor parties. Description: The music level lamp adopts acrylic one-time molded shell, with 32 colorful lamp beads inside, matched with MIC dedicated for music and a 16-bit ARM 8-pin chip processor. Realize the dynamic expression of music and sound field. Principle: The pickup lamp automatically senses external music through the built-in microphone, synchronizes music frequency, lights up RGB full-color LED lamp beads, presents dynamic light effect, and realizes visual effect on music. Specification: Type: D08-RGB material Material: ABS+ electronic components Color: White/Black (optional) Style: USB 5V power supply/rechargeable battery (optional) USB 5V power supply: be plugged in, without batteries. Rechargeable battery: Built-in 250mah battery, can be plugged in or fully charged. Chip type: 16-bit ARM 8-pin chip With APP or Not: without APP Input voltage: > DC 5V 1A Input interface: USB. Frequency: 50-16KHZ Dimension: 181*181*16*18.5mm/7.1x7.1x0.63x0.73in Net weight: 45g Software support: AGC, Intelligent noise elimination, Firmware update (upgrade via built-in serial port) Function: 12 dynamic horse racing modes +18 voice control modes Uses: car/desktop/home speaker/game/outdoor party, etc. Description: MODE/SPEED key: press briefly to turn the white to select the mode. Long press to turn red-select 5 speeds. COLOR/BRIGHT key: press white briefly to select color; Long press to turn green-select level 4 brightness at the same time. Press two keys: press blue at the same time-learn the ambient noise spectrum. Press and hold COLOR at the same time to enter the gain setting mode. Power-on (battery model only): Press the COLOR key after power-off. Turn off (battery models only): face down for 3 seconds. Tips: 1. Do not access a power supply higher than 5V, so as not to damage the motherboard. Please use the power supply equipment certified by relevant institutions. 2. Do not immerse in water, or use it under the condition of humidity higher than 90%. 3. Do not use any solvent or liquid except absolute alcohol to wipe the screen. 4. Non-professionals should not disassemble it by themselves. Product failures caused by non-quality problems are not covered by the warranty. 5. Do not use it for children under 6 years old. 6. Unplug the power supply when not in use. Note: This lamp is matched with a 16-bit ARM 8 pin chip. This lamp has no memory function. After power failure recovery, it will become the first factory mode and the first color. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. 1 x Light Strip 1 x Light Strip 1 x Light Strip |